VSE Corporation – Dublin, California, United States
Location CA – Camp Parks
Job Description & Responsibilities
Must have general technical experience in an engineering or technical discipline that is relevant to the specific work assigned. Technical experience must have involved performing specific assignments in at least one life-cycle phase, i.e., strategic planning, concept development and requirements analysis, system design, engineering and integration, test and evaluation, integrated logistics support, and acquisition and life cycle management. Must be knowledgeable in performing technical related tasks in some or all of the following: planning; equipment analysis; system/component installation integration; interoperability; inventory tracking and assessments; modification methodologies; installation planning; use of drawings and technical data; database structuring, testing and
troubleshooting; supportability and logistics support; engineering investigations; maintenance repair/installation; safety and environmental precautions; packing/unpacking; power/electrical distribution system analysis; facilities/building requirements; cabling; piping; configuration management; product data management; integrated product team or multi-discipline team.
Location CA – Camp Parks
Job Description & Responsibilities
Must have general technical experience in an engineering or technical discipline that is relevant to the specific work assigned. Technical experience must have involved performing specific assignments in at least one life-cycle phase, i.e., strategic planning, concept development and requirements analysis, system design, engineering and integration, test and evaluation, integrated logistics support, and acquisition and life cycle management. Must be knowledgeable in performing technical related tasks in some or all of the following: planning; equipment analysis; system/component installation integration; interoperability; inventory tracking and assessments; modification methodologies; installation planning; use of drawings and technical data; database structuring, testing and
troubleshooting; supportability and logistics support; engineering investigations; maintenance repair/installation; safety and environmental precautions; packing/unpacking; power/electrical distribution system analysis; facilities/building requirements; cabling; piping; configuration management; product data management; integrated product team or multi-discipline team.
• Must follow and promote all safety guidelines established by VSE Corporation and site of assignment.
• Will be required to utilize PPE (personnel protective equipment) as described at work site(s).
• Interpret, understand and utilize technical manuals, technical bulletins and other documentation as it applies to the service, gauging and repair of weapons and weapons systems.• Perform a full range of maintenance and repairs such as disassembly, cleaning, gauging and services on weapons such as small arms, crew serve, and mortars at a minimum.
• Possess a full knowledge of all hand and power tools required to perform assignments as it relates to weapons.
• May be required to perform repairs and purging on NVG’s and other related items as needed.
• Identify parts needed by use of TM’s and other manuals, order, receive and install items as required.
• Document supply and maintenance repair actions on manual forms as well as automated equipment.
• Will be required to perform all functions of maintenance, cleaning and repairs TM-10/20/30 level repairs of items such as; M16 series, M240B, M950, M249, M60, M50, M9, M1911, and other related models.
• Will be required duties of accountability and security of weapons, vaults, safes, and other security equipment as it pertains to site location.
• May be required to travel to multiple out of town locations to perform functions of this description up to 50% of the time employed.
• Must be capable of performing assignments in a fully acceptable manner with little if any supervision and possess good communication skills to maintain liaison with supervisors and supported activity personnel.
• Must be capable of standing, walking, reaching, climbing for long periods of time, and be fully capable of lifting and carrying a minimum of 50 pounds unassisted.
• May be required to work over-time on days, nights and weekends as directed or as work-loads demand.
• Must be a team player and perform duties in a team work environment.
Qualifications Required
• Must possess a minimum of 4 years experience relating to position requirement.
• Experience in another maintenance field is highly desirable for employment when not busy with Small Arms Repair
• Must possess a high school diploma or equivalent.
• Commercial or vocational training in subject area is desirable but not a necessity dependent upon level of experience
• Must be capable of passing background check(s) and substance abuse screening /testing prior to employment and randomly throughout employment. Failure of either could result in terminationLog World
High School diploma desired. Technical training in a related technical discipline or related science, or an equivalent combination of education and experience is required. One year of relevant experience may be substituted for one year of education in the appropriate curriculum.
How to Apply
http://careers.vsecorp.com/
• Will be required to utilize PPE (personnel protective equipment) as described at work site(s).
• Interpret, understand and utilize technical manuals, technical bulletins and other documentation as it applies to the service, gauging and repair of weapons and weapons systems.• Perform a full range of maintenance and repairs such as disassembly, cleaning, gauging and services on weapons such as small arms, crew serve, and mortars at a minimum.
• Possess a full knowledge of all hand and power tools required to perform assignments as it relates to weapons.
• May be required to perform repairs and purging on NVG’s and other related items as needed.
• Identify parts needed by use of TM’s and other manuals, order, receive and install items as required.
• Document supply and maintenance repair actions on manual forms as well as automated equipment.
• Will be required to perform all functions of maintenance, cleaning and repairs TM-10/20/30 level repairs of items such as; M16 series, M240B, M950, M249, M60, M50, M9, M1911, and other related models.
• Will be required duties of accountability and security of weapons, vaults, safes, and other security equipment as it pertains to site location.
• May be required to travel to multiple out of town locations to perform functions of this description up to 50% of the time employed.
• Must be capable of performing assignments in a fully acceptable manner with little if any supervision and possess good communication skills to maintain liaison with supervisors and supported activity personnel.
• Must be capable of standing, walking, reaching, climbing for long periods of time, and be fully capable of lifting and carrying a minimum of 50 pounds unassisted.
• May be required to work over-time on days, nights and weekends as directed or as work-loads demand.
• Must be a team player and perform duties in a team work environment.
Qualifications Required
• Must possess a minimum of 4 years experience relating to position requirement.
• Experience in another maintenance field is highly desirable for employment when not busy with Small Arms Repair
• Must possess a high school diploma or equivalent.
• Commercial or vocational training in subject area is desirable but not a necessity dependent upon level of experience
• Must be capable of passing background check(s) and substance abuse screening /testing prior to employment and randomly throughout employment. Failure of either could result in terminationLog World
High School diploma desired. Technical training in a related technical discipline or related science, or an equivalent combination of education and experience is required. One year of relevant experience may be substituted for one year of education in the appropriate curriculum.
How to Apply
http://careers.vsecorp.com/